Saratoga Springs Foundation Pros logoSaratoga Springs Foundation ProsFoundation Repair · Saratoga Springs, UT
Menu
piering and underpinning in Saratoga Springs, UT

Saratoga Springs Foundation Pros

Piering and Underpinning in Lehi, UT

Push pier and helical pier underpinning in Lehi for settling foundations, with per-pier estimates and no pressure to oversell.

Serving Saratoga Springs and nearby communities.

Piering corrects a foundation where the soil underneath simply can't hold the structure's weight anymore. Saratoga Springs Foundation Pros uses steel push piers or helical piers, driven or screwed down to stable soil or bedrock, to transfer that load off the weak spot and stop the sinking.

Lehi's fast build-out means some footings got set before the surrounding fill soil fully compacted. Give it a couple years and that settling shows up as cracks, sticking doors, or a visibly uneven floor. Push piers and helical piers are the standard fix, the question is which one fits the load and soil at your house.

What's included

What's included with Piering and Underpinning

Typically included: -

  • Inspection to measure settlement and map pier placement — Engineering-based pier selection (push vs helical) for your soil and load - Pier driving to stable strata, with load transfer brackets installed -.
  • Hydraulic lift and foundation leveling — Load testing to verify the system is holding.

Optional

  • Interior crack sealing after the lift is complete
  • Grading adjustment around the perimeter if drainage needs it

Customer prep

  • Clear a path around the foundation perimeter for equipment access
  • Move vehicles and landscaping away from planned pier locations

How it works

How our Piering and Underpinning process works

  1. Load Assessment photo
    Step 1

    Load Assessment

    The structure's weight distribution is analyzed to determine pier placement.

  2. Access Excavation photo
    Step 2

    Access Excavation

    Small excavation points are created along the foundation perimeter.

  3. Pier Driving photo
    Step 3

    Pier Driving

    Piers are driven or screwed into the ground until reaching stable strata.

  4. Load Transfer photo
    Step 4

    Load Transfer

    Brackets connect the piers to the foundation to redistribute structural weight.

  5. Leveling Adjustment photo
    Step 5

    Leveling Adjustment

    Hydraulic equipment carefully raises the foundation to its intended position.

  6. Site Restoration photo
    Step 6

    Site Restoration

    Excavated areas are backfilled and compacted to match the original grade.

Materials

Materials and methods for Piering and Underpinning

  • Steel Push Piers photo

    Steel Push Piers

    Deliver deep, reliable support for heavier structural loads, a common need in Lehi's clay-heavy spots.

  • Helical Piers photo

    Helical Piers

    Provide torque-driven support suitable for variable soil conditions, useful where sandy pockets mix with clay.

  • Underpinning Brackets photo

    Underpinning Brackets

    Connect piers securely to existing foundation footings.

  • Hydraulic Lift Systems photo

    Hydraulic Lift Systems

    Used to achieve controlled and precise foundation elevation changes.

  • Galvanized Coatings photo

    Galvanized Coatings

    Protect steel components from corrosion over time.

  • Compacted Fill Material photo

    Compacted Fill Material

    Used to stabilize soil around newly installed piers.

FAQs

Piering and Underpinning FAQs

What's a fair price per pier?

Per-pier pricing varies with depth to stable soil and site access, but most Utah Valley jobs run in the low-to-mid thousands per pier total for materials and install. A free estimate after the site visit gives you an exact figure.

How long does pier installation take?

Most residential jobs run one to three days depending on pier count and how deep the crew has to go to hit stable soil.

Push piers or helical piers, which is right for my house?

Push piers work well under heavier structural loads. Helical piers suit lighter additions or spots where torque-driven installation is easier than driving. Your soil report and the structure's weight decide it, not a one-size answer.

Do I need a permit for underpinning?

Structural pier installation almost always needs a permit through Lehi or Utah County. We handle that filing as part of the job.

Can I install piers myself?

No. Pier depth and load calculations require engineering judgment and hydraulic equipment a homeowner doesn't have access to. Getting it wrong can make settlement worse.

What drives the total project cost?

Number of piers, depth required, and site access. A detached corner needing deep piers costs more than a shallow, accessible run along one wall.

Next step

Get a Piering and Underpinning estimate in Lehi

Call (385) 336-4151 or request a free estimate. We'll walk the foundation, explain which pier type fits your soil, and put a number on paper before any excavation starts.

Home | Contact | Wall Stabilization

Before & after

Before and after Piering and Underpinning

  • piering and underpinning in Saratoga Springs, UT
    Before
  • piering and underpinning in Saratoga Springs, UT
    After

Ask about Piering and Underpinning

Tell us about the project and how to reach you.

Call (385) 336-4151